Contact Us
Our Products   >  General Purpose Press > NS2 Straightside Press

Our Products

NS2 Straightside Press
NS2 Straightside Press
A unitized straightside frame with better rigidity

More precise bottom dead center

A forced circulation lubrication system, better cooling effects
  • Product Specification

Outline
A unitized straightside frame with better rigidity.

More precise bottom dead center.

A forced circulation lubrication system, better cooling effects.

Controlling thermal deformation of the frame and improving the accuracy of bottom dead center.

Extend the die life and expand the forming range.

Link motion, perfected by AIDA through decades of experience and engineering, expands the range of forming.

Reduce the impact on the die, and reduce the noise.

Higher resistance to eccentric loads.
 
 

Advantages
  1. High-precision, high added-value product processing
  2. A unitized straightside frame structure without gap deformation, forced recirculating lubrication system, the space between guides and shafts made smaller to improve accuracy, reduce thermal deformation and protect environment
  3. Full length slide guides-- The guides in the center of slides promote motion accuracy
 

Specification
Model NS2-1600 NS2-2000 NS2-2500 NS2-3000
(1) (2) (1) (2) (1) (2) (1) (2)
Capacity kN 1600 2000 2500 3000
Tonnage Rating Point mm 6 7 7 6
Stroke Length mm 130 200 150 250 170 280 200 300
Continuous SPM (No Load) spm 40~90 30~60 35~75 25~50 25~60 20~40 20~50 15~35
Die Height mm 400 450 450 500 450 550 600 650
Slide Adjustment mm 100 110 120 130
Slide Area: (a1 x b1) mm 1500 x 580 1850 x 650 2100 x 700 2400 x 900
Bolster Area: (a2 x b2) mm 1800 x 760 2150 x 840 2400 x 920 2600 x 1200
Bolster Thickness mm 165 170 180 200
Location Of Anchor Bolt (a4) mm 2270 2620 2920 3260
(b41, b42) mm 650, 650 700, 700 750, 750 825, 825
Installation Dimensions (a5 x b5) mm 2530 x 1650 2900 x 1750 3200 x 1850 3500 x 2100
(b51, b52) mm 825, 825 875, 875 925, 925 1050 x 1050
Bed Hole Dimensions (L.R. x F.B.) mm 1600 x 320 with ribs 1600 x 320 1900 x 380 with ribs 1900 x 460 2200 x 400 with ribs 2200 x 480 2390 x 440 with ribs 2390 x 520
Overall Height (h2) mm 3215 3300 3610 3710 3980 4135 4360 4460
Bolster Surface Height (h1) mm 900 1000 1100 1150
Dimensions Of Side Opening (b2 x h3) mm 780 x 325 780 x 375 860 x 365 860 x 415 940 x 355 940 x 530 1220 x 530 1220 x 580
Range Where Upper Die Can Be Installed (a3) mm 1520 1870 2120 2420
Main Breaker Capacity (380/415V, 50/60Hz) A 50 75 100 125
Maximum Upper Die Weight kg 800 1200 1650 2300
Approximate Press Weight t 21 29 37 45
Required Air Pressure MPa 0.5 0.5 0.5 0.5
 
 
Used Presses