Contact Us
Our Products   >  High Speed Automatic Press > Hypromax HMX High Speed Press

Our Products

Hypromax HMX High Speed Press
Hypromax HMX High Speed Press
Able to run at optimum speed continuously for long hour
  • Product Description

Outline

Able to run at optimum speed continuously for long hour.

Oil tank and suitable gap are set in the rotating part and the slide parts.

Adopt complete automatic lubrication system, reducing the maintenance cost while improving machine accuracy as well as the stability of long-hour high speed working.

Roll Feeder is installed to realize even accurate feed during high speed working, increasing production output while cutting down material costs.
 

Advantages

  1. Highly rigid frame and 8 point slide guide to prevent inclination, making highly precise forming possible
  2. High speed processing technology perfected through years of experience and engineering
  3. 3000kN working capacity and wide processing range (2300mm)
 

Specification

Model HMX-1250 HMX-2000 HMX-3000 HMX-3000W
Capacity (kN) 1250 2000 3000 3000
Tonnage Rating Point (Above D.B.C) (mm) 3.2 3.2 3.2 3.2
Stroke Length (mm) 30 30 30 30
Working Energy: Min.-Max. spm (J) 1200/1200 2000/2000 3000/3000 3000/3000
Strokes Per Minute Under No Load (spm) 200~800 200~600 160~500 120~410
Micro-inching (spm) About 60 About 60 About 60 About 60
Die Height, Slide To Bolster (mm) 380~430 Note 1 400~480 Note 1 420~520 Note 1 420~520 Note 1
Slide Adjustment (mm) 40 50 60 50
Slide Area (L.R. x F.B.) (mm) 1300 x 600 1700 x 650 2000 x 750 2260 (2300) x 1000 Note 6
Bolster Area (L.R. x F.B.) (mm) 1300 x 850 1700 x 950 2000 x 1000 2300 x 1200
Bolster Thickness (mm) 160~210 Note 2 180~260 Note 2 200 Note 3 200 Note 3
Bolster Surface Height Above Floor (mm) (1000) Note 4 (1000) Note 4 (1000) Note 4 (1000) Note 4
Max. Upper Die Weight (t) 0.5 0.9 1.3 1.5
Side Opening (F.B. x Height) (mm) 350 x 380 460 x 400 560 x 420 560 x 420
Bed Opening (L.R. x F.B.) (mm) 1100 x 280 1500 x 350 1700 x 400 1800 x 420
Main Motor (kW) 30 45 55 55
Power Source (V/Hz) 200/50,60 Note 5 200/50,60 Note 5 200/50,60 Note 5 200/50,60 Note 5
Required Air Pressure (MPa) 0.5 0.5 0.5 0.5
Applicable Feeds RCF-15F O - - -
RCF-25F O O O O
RCF-35F - O O O
Applicable Scrap Cutter Capacity (kN) 200 or 40 40 40 40
Width (mm) 150 or 250 250 or 350 250 or 350 250 or 350
Note 1 Please select die-height within the range shown below
Note 2 Bolster thickness is decided by die height
Note 3 Die-height of HMX-3000 and HMX-3000W are set by column base. Bolster thickness is fixed
Note 4 Bolster surface height is reference value
Note 5 Power source outside of 200V is acceptable as option
Note 6 The value in () indicates the area for tool change
 
 
Used Presses