computer Desktop View
© 2024 - All rights reserved.
Our Products  >  High Speed Automatic Press > Hypromax HMX High Speed Press

Our Products

Hypromax HMX High Speed Press

Hypromax HMX High Speed Press

H001
Able to run at optimum speed continuously for long hour
  • Product Descriptionkeyboard_arrow_down
  • Outline

    Able to run at optimum speed continuously for long hour.

    Oil tank and suitable gap are set in the rotating part and the slide parts.

    Adopt complete automatic lubrication system, reducing the maintenance cost while improving machine accuracy as well as the stability of long-hour high speed working.

    Roll Feeder is installed to realize even accurate feed during high speed working, increasing production output while cutting down material costs.
     

    Advantages

    1. Highly rigid frame and 8 point slide guide to prevent inclination, making highly precise forming possible
    2. High speed processing technology perfected through years of experience and engineering
    3. 3000kN working capacity and wide processing range (2300mm)
     

    Specification

    Model HMX-1250 HMX-2000 HMX-3000 HMX-3000W
    Capacity (kN) 1250 2000 3000 3000
    Tonnage Rating Point (Above D.B.C) (mm) 3.2 3.2 3.2 3.2
    Stroke Length (mm) 30 30 30 30
    Working Energy: Min.-Max. spm (J) 1200/1200 2000/2000 3000/3000 3000/3000
    Strokes Per Minute Under No Load (spm) 200~800 200~600 160~500 120~410
    Micro-inching (spm) About 60 About 60 About 60 About 60
    Die Height, Slide To Bolster (mm) 380~430 Note 1 400~480 Note 1 420~520 Note 1 420~520 Note 1
    Slide Adjustment (mm) 40 50 60 50
    Slide Area (L.R. x F.B.) (mm) 1300 x 600 1700 x 650 2000 x 750 2260 (2300) x 1000 Note 6
    Bolster Area (L.R. x F.B.) (mm) 1300 x 850 1700 x 950 2000 x 1000 2300 x 1200
    Bolster Thickness (mm) 160~210 Note 2 180~260 Note 2 200 Note 3 200 Note 3
    Bolster Surface Height Above Floor (mm) (1000) Note 4 (1000) Note 4 (1000) Note 4 (1000) Note 4
    Max. Upper Die Weight (t) 0.5 0.9 1.3 1.5
    Side Opening (F.B. x Height) (mm) 350 x 380 460 x 400 560 x 420 560 x 420
    Bed Opening (L.R. x F.B.) (mm) 1100 x 280 1500 x 350 1700 x 400 1800 x 420
    Main Motor (kW) 30 45 55 55
    Power Source (V/Hz) 200/50,60 Note 5 200/50,60 Note 5 200/50,60 Note 5 200/50,60 Note 5
    Required Air Pressure (MPa) 0.5 0.5 0.5 0.5
    Applicable Feeds RCF-15F O - - -
    RCF-25F O O O O
    RCF-35F - O O O
    Applicable Scrap Cutter Capacity (kN) 200 or 40 40 40 40
    Width (mm) 150 or 250 250 or 350 250 or 350 250 or 350
    Note 1 Please select die-height within the range shown below
    Note 2 Bolster thickness is decided by die height
    Note 3 Die-height of HMX-3000 and HMX-3000W are set by column base. Bolster thickness is fixed
    Note 4 Bolster surface height is reference value
    Note 5 Power source outside of 200V is acceptable as option
    Note 6 The value in () indicates the area for tool change
     
     
    Used Presses
© 2024 - All rights reserved.