Our Products > General Purpose Press > NS2 Straightside Press

Our Products

NS2 Straightside Press

NC004

A unitized straightside frame with better rigidity More precise bottom dead center A forced circulation lubrication system, better cooling effects

Ask AIDA

Product Specification

Outline

A unitized straightside frame with better rigidity.

More precise bottom dead center.

A forced circulation lubrication system, better cooling effects.

Controlling thermal deformation of the frame and improving the accuracy of bottom dead center.

Extend the die life and expand the forming range.

Link motion, perfected by AIDA through decades of experience and engineering, expands the range of forming.

Reduce the impact on the die, and reduce the noise.

Higher resistance to eccentric loads.

Advantages

High-precision, high added-value product processing
A unitized straightside frame structure without gap deformation, forced recirculating lubrication system, the space between guides and shafts made smaller to improve accuracy, reduce thermal deformation and protect environment
Full length slide guides-- The guides in the center of slides promote motion accuracy

Specification

Model			NS2-1600		NS2-2000		NS2-2500		NS2-3000
			(1)	(2)	(1)	(2)	(1)	(2)	(1)	(2)
Capacity		kN	1600		2000		2500		3000
Tonnage Rating Point		mm	6		7		7		6
Stroke Length		mm	130	200	150	250	170	280	200	300
Continuous SPM (No Load)		spm	40~90	30~60	35~75	25~50	25~60	20~40	20~50	15~35
Die Height		mm	400	450	450	500	450	550	600	650
Slide Adjustment		mm	100		110		120		130
Slide Area: (a1 x b1)		mm	1500 x 580		1850 x 650		2100 x 700		2400 x 900
Bolster Area: (a2 x b2)		mm	1800 x 760		2150 x 840		2400 x 920		2600 x 1200
Bolster Thickness		mm	165		170		180		200
Location Of Anchor Bolt	(a4)	mm	2270		2620		2920		3260
	(b41, b42)	mm	650, 650		700, 700		750, 750		825, 825
Installation Dimensions	(a5 x b5)	mm	2530 x 1650		2900 x 1750		3200 x 1850		3500 x 2100
	(b51, b52)	mm	825, 825		875, 875		925, 925		1050 x 1050
Bed Hole Dimensions (L.R. x F.B.)		mm	1600 x 320 with ribs	1600 x 320	1900 x 380 with ribs	1900 x 460	2200 x 400 with ribs	2200 x 480	2390 x 440 with ribs	2390 x 520
Overall Height (h2)		mm	3215	3300	3610	3710	3980	4135	4360	4460
Bolster Surface Height (h1)		mm	900		1000		1100		1150
Dimensions Of Side Opening (b2 x h3)		mm	780 x 325	780 x 375	860 x 365	860 x 415	940 x 355	940 x 530	1220 x 530	1220 x 580
Range Where Upper Die Can Be Installed (a3)		mm	1520		1870		2120		2420
Main Breaker Capacity (380/415V, 50/60Hz)		A	50		75		100		125
Maximum Upper Die Weight		kg	800		1200		1650		2300
Approximate Press Weight		t	21		29		37		45
Required Air Pressure		MPa	0.5		0.5		0.5		0.5

Used Presses